• EN | LT

Application for 2D claddings and specifications in AutoCAD environment.

Command reference

Pick on button for command demo video

• Profile selection from internal database
• 1. Select cladding type, element type, profile, color, coating, thickness in dialogue window. It is possible to set slope against or along profile in degrees or percents
• 2. "Accept" button sets all selected parameters for current profile
• 3. All parameters of current profile will be used for drawing of vertical or horizontal objects until new current profile will be selected
• 4. Repeatedly opened dialogue window shows all parameters of current profile.
• Inserts vertical items
• 1. Select facade contour by left button (must be preformed as polygon or closed polyline)
• 2. Select alignment point by left button (for example corner of facade or window)
• 3. Instead of alignment point (pt 2) it is possible to press [Enter]. In this case alignment point will be set to left side of facade contour automatically
• Inserts horizontal items
• 1. Select facade contour by left button (must be preformed as polygon or closed polyline)
• 2. Select alignment point by left button (for example corner of facade or window)
• 3. Instead of alignment point (pt 2) it is possible to press [Enter]. In this case alignment point will be set to bottom side of facade contour automatically
• Converts view to plane
• 1. Select object to get all profiles with equal slopes
• 2. Pick point for plane
• Cuts openings
• 1. Select opening contour by left button (must be preformed as polygon or closed polyline)
• 2. Objects full width intersecting with opening contour will be divided automatically
• Divides items by dividing lines or openings
• 1. Select opening contour or dividing line by left button
• 2. Select all objects you want to divide and press [Enter]
• 3. Objects intersecting with opening contour or dividing line will be divided automatically
• 4. This command designed for dividing of long items or dividing objects partially intersecting with opening contour or dividing line
• Divides items by dividing lines or openings with gap
• 1. Select opening contour or dividing line by left button
• 2. Select all objects you want to divide and press [Enter]
• 3. Type gap value and press [Enter]
• Converts axis lines into dividing lines
• 1. Select facade contour by left button to set dividing lines
• 2. Select axial lines for converting into dividing lines and press [Enter]
• Adds supports
• 1. Select axis lines (must be created as polylines on layer "FS-axis")
• 2. Type support width value and press [Enter]
• Support 1: B/2+B/2
• 1. Select axis and press [Enter]
• 2. Select objects to divide by B/2+B/2 mode and press [Enter]
• Support 2: continuous
• 1. Select objects to append and press [Enter]
• Support 3: B/2+0.1L
• 1. Select axis
• 2. Select nearest axis to the right side to calculate distance
• 3. Select objects to divide by B/2+0.1L mode and press [Enter]
• Support 4: 0.1L+B/2
• 1. Select axis
• 2. Select nearest axis to the left side to calculate distance
• 3. Select objects to divide by 0.1L+B/2 mode and press [Enter]
• Support 5: 0.1L+0.1L
• 1. Select axis
• 2. Select nearest axis to the left side to calculate distance
• 3. Select nearest axis to the right side to calculate distance
• 4. Select objects to divide by 0.1L+0.1L mode and press [Enter]
• Support 0.1L+0.2L
• 1. Select axis
• 2. Select nearest axis to the left side to calculate distance
• 3. Select nearest axis to the right side to calculate distance
• 4. Select objects to divide by 0.1L+0.2L mode and press [Enter]
• Support 0.2L+0.1L
• 1. Select axis
• 2. Select nearest axis to the left side to calculate distance
• 3. Select nearest axis to the right side to calculate distance
• 4. Select objects to divide by 0.2L+0.1L mode and press [Enter]
• Clear side overlap
• 1. Select objects to clear side overlap and press [Enter]
• Side overlap 50%
• 1. Select objects to set side overlap 50% and press [Enter]
• Side overlap 2x
• 1. Select objects to set side overlap 2x and press [Enter]
• Side overlap 3x
• 1. Select objects to set side overlap 3x and press [Enter]
• Sets nonstandard RAL color
• 1. Select nonstandard RAL color in color table
• 2. Select destination objects to set new color and press [Enter]
• Sets Zn coating
• 1. Select destination objects to set Zn coating and press [Enter]
• Sets other thickness
• 1. Select objects to set new thickness and press [Enter]
• 2. Type new thickness value and press [Enter]
• Matches selected item properties
• 1. Select object by left button to set source properties
• 2. Select destination objects to match properties and press [Enter]
• 3. Command matches profile, thickness, length, color, coating and slopes.
• Changes length from the start of item
• 1. Start point is set to bottom side of vertical object and right side of horizontal object
• 2. Select objects to change length and press [Enter]
• 3. Type lengthening value or pick two points on screen and press [Enter]
• 4. If shortening is required, type negative value (keyboard option only)
• Changes length from the end of item
• 1. End point is set to upper side of vertical object and left side of horizontal object
• 2. Select objects to change length and press [Enter]
• 3. Type lengthening value or pick two points on screen and press [Enter]
• 4. If shortening is required, type negative value (keyboard option only)
• Performs numbering of all items in the drawing
• 1. Performs automatical numbering of all objects in the drawing
• 2. Attention: sorting and numbering requires time dependent on complexity of drawing and quantity of different objects and properties.
• Shows information for selected item
• 1. Select object by left button to get information
• 2. If properties window moved, selected item will be highlighted
• Shows and hides number labels
• 1. Dependent on drawing status shows and hides number labels
• Shows and hides all labels
• 1. Dependent on drawing status shows and hides all labels
• Shows and hides length labels
• 1. Dependent on drawing status shows and hides length labels
• Shows and hides color labels
• 1. Dependent on drawing status shows and hides color labels
• Shows and hides thickness
• 1. Dependent on drawing status shows and hides thickness labels
• Shows and hides slope against profile
• 1. Dependent on drawing status shows and hides slope against profile labels
• Shows and hides slope along profile
• 1. Dependent on drawing status shows and hides slope along profile labels
• Shows and hides side overlap
• 1. Dependent on drawing status shows and hides side overlap labels
• Shows and hides construction line
• 1. Dependent on drawing status shows and hides construction line
• Add grouping line automatically
• 1. Select object to get all similar profiles
• Add grouping line manually
• 1. Select object to get all similar profiles
• 2. Pick two points on screen for grouping line
• Deletes all objects and tables
• 1. Deletes all objects and tables automatically
• Sets drawing data for Insert border command
• 1. Opens text file for drawing data editing
• 2. Write required data and save file
• 3. Saved data will be inserted into drawing border
• Inserts predefined A4 border
• 1. Pick area by two points on screen for drawing border
• 2. Border scale will be calculated automatically by selected area
• 3. Instead of selecting area it is possible to press [Enter]. In this case drawing border will be inserted in scale M1:100. Pick border insertion point on screen
• Inserts predefined A3 border
• 1. Pick area by two points on screen for drawing border
• 2. Border scale will be calculated automatically by selected area
• 3. Instead of selecting area it is possible to press [Enter]. In this case drawing border will be inserted in scale M1:100. Pick border insertion point on screen
• Inserts predefined A2 border
• 1. Pick area by two points on screen for drawing border
• 2. Border scale will be calculated automatically by selected area
• 3. Instead of selecting area it is possible to press [Enter]. In this case drawing border will be inserted in scale M1:100. Pick border insertion point on screen
• Inserts predefined A1 border
• 1. Pick area by two points on screen for drawing border
• 2. Border scale will be calculated automatically by selected area
• 3. Instead of selecting area it is possible to press [Enter]. In this case drawing border will be inserted in scale M1:100. Pick border insertion point on screen
• Inserts specification table
• 1. Pick table insertion point on screen
• 2. Write description for specification
• 3. Specification table will be created for all objects in drawing
• 4. Tip: insert A4 format drawing border in scale M1:100 before calling of specification command
• Inserts specification table by selection
• 1. Select objects for specification and press [Enter]
• 2. Pick table insertion point on screen
• 3. Write description for specification
• 4. Tip: insert A4 format drawing border in scale M1:100 before calling of specification command
• Inserts specification table by color
• 1. Select object for specification by color and press [Enter]
• 2. Pick table insertion point on screen
• 3. Write description for specification
• 4. Tip: insert A4 format drawing border in scale M1:100 before calling of specification command
• Inserts specification table by thickness
• 1. Select object for specification by thickness and press [Enter]
• 2. Pick table insertion point on screen
• 3. Write description for specification
• 4. Tip: insert A4 format drawing border in scale M1:100 before calling of specification command
• Specification table exported to tab-delimited format file
• 1. Opens specifications in tab-delimited format file for importing into speadsheet
• Inserts legend of profiles
• 1. Pick A4 border insertion point on screen
• 2. Command inserts legend for all used profiles in drawing
• Inserts cladding label
• 1. Select object for label
• 2. Pick point on screen for text label
• 3. Text style and size depends on current dimension style settings
• Registration order-form
• Attention: Windows Vista requires AutoCAD loaded in administration mode (right click on icon and "Run as administrator")
• 1. Fill-in license request form. All fields required
• 2. Send us new created registration file by email
• About application
• 1. Opens links to online help in browser
• Select beam
• Select joint
• Vertical beam
• Vertical beam
• Vertical beam
• Vertical beam
• Horizontal beam
• Horizontal beam
• Horizontal beam
• Horizontal beam
• Freehand beam
• Vertical joint
• Horizontal joint
• Joint by object
• Freehand joint
• Table of profiles
• Table of beams
• Table of beams by selection
• Table of beams by thickness
• Table of joints
• Table of joints by selection
• Table of joints by color
• Project data
• Panel overlap
• Move labels up
• Move labels down
• Total specification
• Edit specification line
• Table of profiles by selection
• Table of profiles by color
• Table of profiles by thickness
• Vertical profile
• Horizontal profile
• Insert border

All product names, registered trademarks, trade names or company names mentioned at in-axis.com or in-axis.lt are used for identification only and are the property of their respective owners.

Home